OBDSTAR X300DP and OBDSTAR X300 PRO3 is free update to perform automatic identification, read pincode, read eeprom, write EEPROM, read Flash and Cluster calibration on Peugeot /Citroen/ DS models.
Take Peugeot BSI 2004 HO5 odometer adjustment for example.
Guide:
This is Peugeot BSI 2004 HO5 type removed from the car.
Connect X300 DP / X300 Pro 3 with the VCI box and BSI box.
Tab “Cluster Calibrate”, then “Peugeot”.
Tab the latest version.
Warning! Please contact VCI to main unit by USB, to keep stability of vehicle communication.
Tab “OK”
BSI (cluster calibration)
Option “Auto select” and “Manual select”: If you don’t know what specifi type of BSI, you can tab “Auto select”, if you know the BSI type, tab “Manual select”.
Tab the third option “JC BSI2004-H0X”
Switch ignition on
Next is to operate one by one: Read EEPROM, Mileage adjustment, Write EEPROM, Read Flash.
Communicating…
Logging in to the system…take 1-2 minutes.
Reading data…
Please enter a file name to save.
You should take note this file name.
Input value:… tab “OK”
The file name that you enter already exists, whether to cover? tab “Yes”
Operation succeed.
Back to tab “Mileage adjustment”
Has the “Read EEPROM” and “Read Flash” functions been performed? tab “Yes”
It will take 2-60 mins during testing, keep the vehicle fully charged and don’t unplug OBD connector.
Tab “Yes”.
Communicating…
Current mileage: 3000 km
Please confirm the mileage correctly and press ENTER to contine.
Tab “Yes”.
Please input the mileage of the adjustment.
Communicating…
Switch ignition off.
Switch ignition on.
Communicating…
Adjustment success.
Done
http://cnobd2tool.spruz.com/pt/-How-to-adjust-odometer-on-Peugeot-BSI-2004-HO5-with-OBDSTAR-X300DP-X300-PRO3-.2-22-2018/blog.htm
留言列表
