One customer asked :I bought the Allscanner VCX HD heavy duty diagnostic system 6 month ago but i lose my lap top, i wanna re install on another one but io need te activation code for all secanner, CAT ET 2009B a, cummins insite, and my dealer don`t ansewer me, cano you sell me these?? i wanna pay fot these codes.
allscanner vcx hd heavy duty:http://www.cnautotool.com/goods-318-VCX+HD+Heavy+Duty+Truck+Diagnostic+System-Allscanner.html
Cnautotool Answer :
Allscanner VCX HD heavy duty truck diagnostic system activation and installation guide:
1. Install OEM Software
Must first install the OEM software! Depending on
Your product configuration, option to install:
TIS Techstream
HONDA Diagnostic System
VIDA2008C
2. Install VCX32 Driver
This step Must be followed after step one
1)To install VCX32 Driver as follows:
Double-click VCX32 Driver Install.exe, click NEXT.
2)Read License agreement and select accept the terms of the License agreement, click NEXT.
3)Input user information, click NEXT
4)Select type of installation:completed Install, click NEXT
5)Ready to install, click NEXT to stat.
6)Installing……
7)Display VCX USB Driver Installation Wizard, click NEXT
8)Driver Installing……Driver Installation finished, click Finish
9)All Installation complete, click Finish
3. Install OEMSetup
Depending on your product configuration, option to install the support driver for OEM: Start->Program->ALLScanner->VCX32-OEMSetup
4. Connect Hardware
Need to connect hardware exactly before diagnosing: PC-usb cable-VCX-DTC cable-truck.
VCX obtain power from vehicle through DLC cable. The LED will flash in turn after hardware proper connection. Power Led keep on. VCX connect with PC through USB cable.
5. Install VCX USB Driver
1) Connect VCX USB cable to PC by the first time, it will hint that new hardware was found, please refer to the following: Display Found New hardware wizard, Select No, not this time, click NEXT.
2) Select Install the software automatically, click NEXT
3) Click Continue Anyway
4) New hardware wizard completed, click Finish. Found new hardware wizard, will be displayed again, operation is same as above.
6. Test VCX Connection
Please confirm the following before connection
testing:
-Connect hardware according to section 4.1
-Install USB Driver according to section 4.2
Double-click DeviceConfig on the desktop.
1)Select the Connect page.
2)Click Connect
7. Activate VCX Device
1) Connect hardware, Open DeviceConfig
2)Display as above Fig, it shows device was not activated. Click OK, And Click Connect.
3) Select the Device Activate page, Please record Device SN and Active Code, provide them to dealer for License (Activation file)
4) After receiving License file, click Select License to select this file.
5) Click Activate, Display the Device is activated, it shows Activation successful. ClickOK
8. Configure Wi-Fi network
1) Please confirm the following before using:
- Use only the wireless router included in the package
- 802.11a/b/g wireless card needed for Laptop Connect VCX to Vehicle and get power from it. Turn on the wireless router.
First, Make Laptop to connect to the wireless network:
Net Name(SSID):DIAG-WIFI
Connect KEY:1234512345
2)Open DeviceConfig, Select the WiFi Configure page, and Select WiFi. Then click Scan WiFi.
3)After a successful scan, it will list all devices with IP. Then select the IP of device, and click Connect to connect with Device.
4)Warning Any changes to the wireless router would cause the device to not work.
Know the information about car diagnostic tool and obd2 scanner from www.cnautotool.com, there are many hot ones like:
AuToboss v30, VAS 5054A,you can go to here:http://www.cnautotool.com
留言列表
