This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a gm tech2 gm diagnostic scanner
Model: 2007 Cadillac CTS-V
The process…here you go…
The key to be programmed
Insert the key and ignition on
The gm tech 2 scan tool power on
In the main menu, go to Diagnostics
Select model: 2007 Cadillac D (DN) CTS-V passenger car
Then go to Vehicle Control Systems
Read vehicle info
Engine type: (U) 6.0L V8 LS2
Go to Module Setup
Then Remote control door lock receiver
Program key fobs…
Two key fobs to be programmed
Tips of programming key fobs:
All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the TECH 2 at CnAutotool.com. Programming takes 15-30 minutes….
Programmed complete and test it’s working.
Done!
http://obd2scanner.info/2017/06/19/how-to-program-cadillac-key-fob-with-gm-tech2-clone/
留言列表
